JVC KW-NX7000 User Manual

• Adjust the settings.
•
Finish the procedure.
State!
Province*
Time Zone
Daylight
Saving Time
Reverse
Signal
Polarity
Select the State or Province
where you are living.
Select your residential area for
clock adjustment.
• This unit automatically sets
the time by GPS signal.
Select <Auto> if your
residential area is subject to
Daylight Saving Time.
Select the reverse signal polarity
«Battery> or <GND»
according to the connection of
your car.
You can also change these settings through
the menu screens as follows:
• Language:
<11II (Function Menu»
-< _buna (Map Settings» -
<System> - <Language> (IrE page 51)
• Time Zone:
<AV Menu> - <Setup> -< (Clock»
-<Time Zone> (I@' page 105)
• Daylight Saving Time:
<AV Menu> - <Setup> - <E.l (Clock»
-<D5T> (I@' page 105)
• Reverse Signal Polarity:
<AV Menu> -<Setup>-
<
.... ..2 (Others» - <Reverse Signal>
(IrE page 108)
* You can also change the State or Province when
searching for a destination.
8

JVC KW-NX7000 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Display diagonal	7 \
Display resolution	336 x 960 pixels