P
problesSep 10, 2025
What does “CANNOT SKIP” mean on my JVC Car Receiver?
- JJohn BurkeSep 10, 2025
If your JVC Car Receiver displays “CANNOT SKIP”, it means the skip limit has been reached.
To Next PageTo Next PageWhat does “CANNOT SKIP” mean on my JVC Car Receiver?
If your JVC Car Receiver displays “CANNOT SKIP”, it means the skip limit has been reached.
What to do if “MISWIRING CHK WIRING THEN RESET UNIT”/“WARNING CHK WIRING THEN RESET UNIT” appears on my JVC KW-R800BT?
If the message “MISWIRING CHK WIRING THEN RESET UNIT” or “WARNING CHK WIRING THEN RESET UNIT” appears on your JVC Car Receiver, ensure the terminals of the speaker leads are properly insulated with tape before resetting the unit. If the message persists, no answer.
Why is my JVC KW-R800BT Car Receiver not detecting my Bluetooth device?
If your JVC Car Receiver is not detecting your Bluetooth device, try searching from the Bluetooth device again or reset the unit.
What to do if pairing cannot be made on JVC Car Receiver?
If pairing cannot be made on your JVC Car Receiver, ensure you have entered the same PIN code on both the unit and the Bluetooth device. If the problem persists, delete the pairing information from both the unit and the Bluetooth device, then perform pairing again.
Why does my JVC Car Receiver display “NO SIG” or “NO SIGNAL”?
If your JVC Car Receiver displays “NO SIG” or “NO SIGNAL”, make sure your Satellite Radio antenna is mounted outside the vehicle and move the vehicle to an area with a clear view of the sky.
Why doesn't my iPod/iPhone turn on or work with my JVC Car Receiver?
If your iPod/iPhone does not turn on or work with your JVC Car Receiver, check the connection between the unit and the iPod/iPhone. You can also try detaching and resetting the iPod/iPhone using a hard reset. Check whether the setting is appropriate.
Why does “NOT SUPPORT” appear on my JVC KW-R800BT Car Receiver?
If “NOT SUPPORT” appears on the display of your JVC Car Receiver and the track skips, check whether the track is a playable file format.
Why does “CANNOT PLAY” flash on my JVC Car Receiver?
If “CANNOT PLAY” flashes on the display of your JVC Car Receiver, verify that the connected device is compatible with the unit and that the device contains files in supported formats. You might also try reattaching the device.
Why does “INVALID CH” appear on my JVC KW-R800BT?
If “INVALID CH” appears on the display of your JVC Car Receiver for about 5 seconds and then returns to the previous channel while listening to SIRIUS Satellite Radio, it means there is no broadcast on the selected channel. You can select another channel or continue listening to the previous channel or default channel.
What does “RESET 8” mean on my JVC KW-R800BT while receiving HD Radio?
If “RESET 8” appears on the display of your JVC Car Receiver while receiving HD Radio, reconnect the unit and the HD Radio tuner box correctly, then reset the unit.
General| Model | KW-R800BT |
|---|---|
| CEA-2006 Compliant | Yes |
| Power Output | 50W x 4 |
| RMS Power Output | 22W x 4 |
| Preamp RCA Outputs | 3 (Front, Rear, Subwoofer) |
| Subwoofer Output | Yes |
| Display Type | LCD |
| Display Color | Variable color |
| Bluetooth | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| Radio Tuner | AM/FM |
| HD Radio | No |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| FLAC Playback | No |
| Remote Control | Yes |
| Steering Wheel Control | Yes |
| Satellite Radio Ready | Yes |
| EQ Settings | Yes |
| Preamp Voltage | 2.5V |
