JVC KW-V235DBT - Page 43

ENGLISH 43
BLUETOOTHBLUETOOTH
❏ Sending text during a call
You can send text during a call using the DTMF (Dual
Tone Multi Frequency) function.
While talking...
❏ Switching between two connected
devices
You can change the device to use in the following
situations:
• When 2 devices are connected
• While in phone control screen
• The active device is highlighted.
❏ Making a call
1 Display the phone control screen.
On the Home screen:
KW-V330BTKW-V230BT
KW-V235DBT
• You can also display the phone control screen
as follows:
– For KW-V230BT/KW-V235DBT: Select
[Phone] on the pop-up short-cut menu
(Page11).
– For KW-V330BT: Select [
] on the pop-up
short-cut menu (Page11).
2 Select a method to make a call.
1
2
3
4
5
1
From the call history*
2
From the phone book*
3
From the preset list
• To preset, see page45.
4
Direct number entry
5
Voice dialing
• You can display the <Bluetooth Setup>
screen by pressing [
].
* When the mobile phone is not compatible with Phone Book
Access Profile (PBAP), the call history and the phone book are not
displayed.
Continued on the next page...
2017KW-VEntryE.indb432017KW-VEntryE.indb43 2016/09/2717:412016/09/2717:41