JVC KW-V235DBT - Unit Installation and Removal

ENGLISH 67
CONNECTION/INSTALLATIONCONNECTION/INSTALLATION
Installing/removing the unit
❏ Installing the unit
• Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
❏ Installing the trim plate
Attach the trim plate (2).
2
❏ Removing the trim plate
1 Engage the catch pins on the extraction
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
4
2 Remove from the upper two catches.
• The frame can be removed from the top side in
the same manner.
❏ Removing the unit
1 Remove the trim plate. (See the left
column.)
2 Insert the two extraction keys (4), then
pull them as illustrated so that the unit can
be removed.
4
• Be careful to avoid injury from the catch pins on
the extraction key.
2017KW-VEntryE.indb672017KW-VEntryE.indb67 2016/09/2717:412016/09/2717:41