EasyManua.ls Logo

JVC KW-V250BT - Settings; Audio Settings

JVC KW-V250BT
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings Settings
Audio settings
Display the <Audio> screen.
On the Home screen, touch as follows:
Then, on the <Settings> screen, touch [Audio].
Settings
Equalizer
Sound Effect
Fader / Balance
Speaker / X’over
Time Alignment
Enter
Enter
Enter
Enter
Enter
Display
Input
System
Audio
Key
E.g. Audio settings screen for KW-V250BT/
KW-V25BT
You cannot change the <Audio> screen in the
following situations:
When the AV source is turned off.
When the Bluetooth phone is used (making or
receiving a call, during a call, or while voice dialling).
<Equalizer>
The following adjustments are memorized for each
source until you adjust the sound again. If the source
is a disc, the adjustments are stored for each of the
following categories.
• DVD/VCD
• CD
• DivX*1/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC
You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
Select a preset sound mode on the <Equalizer>
screen.
Flat (Initial)/Hard Rock/Pop/Hip Hop/R&B/Jazz/
Classical/drvn 3/drvn 2/drvn 1/User
Equalizer SRC Name
Preset
[dB]
0
+3
+5
+7
+9
-9
62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz]
-7
-5
-3
Flat
Bass EXT
SW LEVEL
Q factor
1.5
0
ON OFF EQ INIT
ALL SRC
To apply the adjusted equalizer to all playback
sources, touch [ALL SRC], then touch [OK] to
confirm.
Store your own sound adjustments
1 Select a preset sound mode.
2 Select a band (1) and adjust the level (2),
then adjust the sound (
3).
Equalizer SRC Name
Preset
[dB]
0
+3
+5
+7
+9
-9
62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz]
-7
-5
-3
Flat
Bass EXT
SW LEVEL
Q factor
1.5
0
ON OFF EQ INIT
ALL SRC
Adjust the sound as follows:
<Q factor>
Adjusts the width of the frequency.
1.35/1.5 (Initial)/2.0
<Bass EXT>
Activates/deactivates bass.
ON/OFF (Initial)
<SW LEVEL>
Adjusts the subwoofer level.*2
–50 to +10 (Initial: 0)
To clear the adjustment, touch [EQ INIT].
3 Repeat step 2 to adjust the level of other
bands.
*1 Only for KW-V350BT Region 4.
*2 Not adjustable when <None> is selected for subwoofer on the
<Speaker Select> screen. (Page 42)
40 ENGLISH
00_KWV_2019ST_KR.indb 4000_KWV_2019ST_KR.indb 40 1/6/2018 8:19:20 AM1/6/2018 8:19:20 AM

Related product manuals