<Home Customize>
Selects the playback source to display on the Home
screen.
Select an item to replace (1), then select an
item (
2) you want to display in the selected
position.
Repeat the procedure to customize your Home screen.
• Only selectable sources are shown.
• You cannot locate [Camera] on the Home screen.
• Touching and holding the playback source icon on
the Home screen can also display the item selection
screen.
<Screen Adjustment>
Adjust the brightness and blackness of the screen.
Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer
off), then change the following settings:
<Bright>
Adjusts brightness.
• –15 to +15 (Initial: 0 for dimmer on, +15 for dimmer
off)
SettingsSettings
<Black>
Adjusts blackness.
• –10 to +10 (Initial: 0)
<Video Output>
Select the color system of the external monitor.
• NTSC/PAL (Initial)
“Please Power Off” appears when the setting is
changed. Turn off the power, then turn on to enable
the change.
<Viewing Angle>
Select the viewing angle in relation to the monitor to
make the screen on the panel easier to see.
• Under 0° (Initial)/5°/10°/15°/20°
Input settings
Display the <Input> screen.
On the Home screen, touch as follows:
Then, on the <Settings> screen, touch [Input].
E.g. Input settings screen
<Rear Camera>
Configure the rear view camera settings.
<Rear Camera Interruption>
• ON (Initial): Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
– A caution message appears on the screen. To
remove the caution message, touch the screen.
• OFF: Select this when no camera is connected.
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
• OFF: Hides the parking guidelines.
35
ENGLISH
00_KWV_2019ST_EQ_EN.indb 3500_KWV_2019ST_EQ_EN.indb 35 29/6/2018 11:57:04 AM29/6/2018 11:57:04 AM
To Next Page
Loading...
