Initial settings
When you power on the unit for the first time or reset
the unit, the <Initial Settings> screen appears.
Perform the initial settings.
Once completed, the Home screen appears.
<Demonstration>
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
Getting Started Getting Started
Turning off the AV source
1 Display the source/option selection
screen.
On the Home screen, touch as follows:
2 Turn off the AV source.
On the source/option selection screen, touch as
follows:
Turning off the screen and button
illumination
1 Display the pop-up short-cut menu.
2 On the pop-up short-cut menu, touch as
follows:
(Hold)
To turn on the screen and button illumination:
Press FNC on the monitor panel or touch the screen.
Basic OperationsBasic Operations
Adjusting the volume
You can adjust the volume (00 to 35) by pressing + to
increase and pressing – to decrease.
• Holding + increases the volume continuously to
level 15.
4
ENGLISH
00_KWV_2019ST_EQ_EN.indb 400_KWV_2019ST_EQ_EN.indb 4 29/6/2018 11:56:57 AM29/6/2018 11:56:57 AM
To Next Page
Loading...
