EasyManua.ls Logo

JVC KW-V520BT - How to Reset Your Unit

JVC KW-V520BT
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH 3
For KW-V420BTM/KW-V320BTM/KW-V220BTM/
KW-V520BTM
V Cautions on the monitor:
The monitor built into this unit has been
produced with high precision, but it may have
some ineffective dots. This is inevitable and is not
considered defective.
Do not expose the monitor to direct sunlight.
Do not operate the touch panel using a ball-point
pen or similar tool with a sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it
off).
When the temperature is very cold or very hot...
Chemical changes occur inside, causing
malfunction.
Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in such
environments.
For safety...
Do not raise the volume level too much, as this
will make driving dangerous by blocking outside
sounds, and may cause hearing loss.
Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
How to reset your unit
If the unit fails to operate properly, press the reset
button.
KW-V420BT/KW-V420BTM
KW-V320BT/KW-V320BTM
KW-V220BT /KW-V220BTM/KW-V120M
KW-V520BT/KW-V520BTM
BEFORE USE
BEFORE USE
2016KW-VEntryM.indb 32016KW-VEntryM.indb3 2015/09/15 15:522015/09/1515:52

Related product manuals