JVC KW-V520BT - Using External Audio;Video Players-AV-IN

ENGLISH 33
OTHER EXTERNAL COMPONENTS
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 47.
❏ Starting playback
Preparation:
“AV-IN” cannot be selected when <iPod Setup>
is set to [USB+AV-IN]. Be sure to select [USB 1
Wire] for <iPod Setup> beforehand. (Page22)
1 Connect an external component to the
iPod/AV-IN input terminal. (Page
63)
2 Select “AV-IN” as the source. (Page11)
3 Turn on the connected component and
start playing the source.
❏ Changing the AV-IN name
You can change the AV-IN name displayed on the
“AV-IN” source control screen.
1 Display the <VIDEO Mode> screen.
2 Select an AV-IN name.
• This setting does not affect the source name
displayed on the Home screen.
2016KW-VEntryM.indb 332016KW-VEntryM.indb33 2015/09/15 15:522015/09/1515:52