JVC KW-XC550 - Adjust the Level; Adjusting the Sound

ENGLISH
19
Adjusting the sound
You can adjust the sound characteristics to your preference.
1
Select the item you want to adjust.
Indication To do: Range
BAS Adjust the bass –06 (min.) — +06 (max.)
(Bass)
TRE Adjust the treble –06 (min.) — +06 (max.)
(Treble)
FAD Adjust the front and rear speaker R06 (rear only) — F06 (front only)
(Fader)* balance
BAL Adjust the left and right speaker L06 (left only) — R06 (right only)
(Balance) balance
LOUD Turn on or off the loudness function** ON — OFF
(Loudness)
VOL Adjust the volume 00 (min.) — 50 (max.)
(Volume)
Notes:
* If you are using a two-speaker system, set the fader level to “00” (center).
** The loudness function can boost low and high frequencies to produce a well-balanced sound at
low volume levels. When the loudness function is “ON,” the LOUD indicator lights up.
2
Adjust the level.
Note:
Normally the + and – buttons work as the volume control buttons.
So you do not have to select “VOL” to adjust the volume level.
SEL
2
1
EN18-20.KW-XC550[J]/f 98.12.22, 4:36 PM19