E
Erika TaylorAug 31, 2025
Why does “No Antenna” appear on the display of my JVC KW-XR810 Car Receiver?
- DDanielle SchwartzAug 31, 2025
This message indicates that the antenna is not properly connected. Make sure to connect the antenna firmly.
To Next PageTo Next PageWhy does “No Antenna” appear on the display of my JVC KW-XR810 Car Receiver?
This message indicates that the antenna is not properly connected. Make sure to connect the antenna firmly.
How to fix JVC Car Receiver when it does not detect the Bluetooth device?
Try searching from the Bluetooth device again. If that doesn't work, reset the unit, and then search from the Bluetooth device again.
Why does 'No File' appear on the display (iPod/iPhone) on my JVC Car Receiver?
If 'No File' appears on the display when using an iPod/iPhone with your JVC Car Receiver, no tracks are stored. Import tracks to the iPod/ iPhone.
Why is “Voice Dial” not successful on my JVC KW-XR810 Car Receiver?
Use “Voice Dial” calling method in a more quiet environment. Reduce the distance from the microphone when you speak the name. Change the to , then try again.
Why don't tracks play in the order I intended on my JVC KW-XR810 Car Receiver?
The playback order is determined by the file name. Folders with numbers at the beginning of their names are sorted numerically. However, folders without numbers at the beginning are sorted according to the file system of the CD.
Why is noise generated by my JVC KW-XR810?
The track played back is not an MP3/WMA/WAV track. Skip to another file. Do not add the extension code , , or to non-MP3/WMA/WAV tracks.
Why is the phone sound quality poor on my JVC KW-XR810?
Poor phone sound quality may occur if the distance between the unit and the Bluetooth mobile phone is too great. Try reducing the distance. You might also try moving the car to a location with better signal reception.
Why does Echo or noise occurs (Bluetooth) on my JVC KW-XR810 Car Receiver?
If echo or noise occurs during Bluetooth operation with your JVC Car Receiver, adjust the microphone unit’s position.
Why does “Loading” appear on the display while listening to the XM Satellite radio on my JVC KW-XR810?
The unit is loading the channel information and audio. Text information are temporarily unavailable.
What to do if the JVC KW-XR810 does not detect the Bluetooth device?
If your JVC Car Receiver is not detecting the Bluetooth device: * Try searching from the Bluetooth device again. * Reset the unit, then search from the Bluetooth device again.
General| Subwoofer Preamp RCA Output | Yes |
|---|---|
| Display Type | LCD |
| Display Color | White |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| ID3 Tag Display | Yes |
| AM/FM Tuner | Yes |
| FM Presets | 18 |
| AM Presets | 6 |
| Radio Data System (RDS) | Yes |
| Memory Card Slot | No |
| iPod Compatibility | Yes |
| Steering Wheel Control Compatible | Yes |
| Remote Control | Yes |
| DIN Size | Double DIN |
| RMS Power Output | 22 watts x 4 channels |
| Preamp RCA Outputs | 3 Pairs |
| Preamp Voltage | 2.5 volts |
| AUX Input | Front |
| Peak Power Output | 50 watts x 4 channels |
