21ENGLISH
1
2
] <Bluetooth> ] <Setting>
3
]
Select a setting item, then repeat
the procedure to change the setting
accordingly.
• To return to the previous menu, press
T/P BACK
.
• To exit from the menu, press
DISP
or
MENU
.
Setting item Selectable setting, [ Initial: Underlined ]
Auto Connect • Last
• Off
: The connection is established automatically with the last
connected Bluetooth device when you turn on the unit.
: The unit does not connect the Bluetooth device automatically.
Connect the device manually. ( 17)
Auto Answer
• On
• Off
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the
calls manually. ( 19)
Message
Notice
• On
• Off
: The unit informs you of the arrival of a SMS by ringing and
displaying “Received Message.”
: The unit does not inform you of the arrival of a SMS.
MIC Setting —
: Adjust the volume of the microphone connected to the unit.
[ Level 01/02/03 ]
NR/EC Mode
• On
• Off
: The unit adjusts the Noise Reduction and Echo Cancelation of
the microphone connected to the unit for clearer sound.
: Cancels.
Ringing Tone
• In Unit
• In Phone
: The unit rings to alert you when a call/SMS comes in.
Call: Select your preferred ring tone when a call comes
in. [ Tone 1/2/3 ]
Message: Select your preferred ring tone when a SMS comes
in. [ Tone 1/2/3 ]
: The unit rings (using the connected phones’ ring tone) to alert
you when a call/SMS comes in. (The connected mobile phone
rings if it does not support this feature.)
Changing the Bluetooth settings
[Hold]
EN12-21_KW-XR811_003A_2.indd 21EN12-21_KW-XR811_003A_2.indd 21 2/1/10 2:41:08 PM2/1/10 2:41:08 PM
To Next Page
Loading...
