11
Auto setup
Your television has an Automatic Tuning
System which makes tuning in your television
easy. This Automatic tuning System scans
the entire reception range in your area and
automatically stores all available analogue and
digital channels of suitable signal strength
in the correct order e.g. BBC1 will tune into
channel 1, BBC2 will tune into channel 2, etc.
Preparation:
Press (Power) on the unit or press (On/
Standby) on the remote.
1
Auto Installation menu will appear.
Press
or to select desired language.
Then press ENTER
.
Auto Installation
- Setup 1 -
Language : English
German
French
Italian
Polish
2
Press or to select your country.
Then press ENTER
.
Auto Installation
- Setup 2 -
Country : UK
Germany
France
Italy
Poland
3
Press or to select Home.
Then press ENTER
.
Auto Installation
- Setup 3 -
TV Location :
Please select where the TV
will be placed. The picture
will be optimized for that
location.
Home
Store
4
If you cancel Auto Power Off (see page 20),
press or to select Off. Then press ENTER
.
Auto Installation
- Setup 4 -
Auto Power Off :
Your TV has been set to
power off after 4 hours of
continuous viewing. If you
want to change this setting,
please choose Off. This
setting can also be changed
in the MENU.
Off
1 Hour
2 Hours
4 Hours
5
TV will search for Digital TV-channels at first.
Connect your DVB-T antenna now.
Continue with ENTER to start auto tuning.
The tuning’s progress will be displayed in
percent for confirmation.
Auto Installation
- Setup 5 -
Start Auto Tune (Digital)
Note:
Please be patient - the Auto Tuning process
can take several minutes to complete.
•
6
When the tuning for Digital TV-channels is
completed, you will be asked if you want
to proceed to autotuning for Analogue
TV-channels. If you wish to start autotune
Analogue TV-channels, connect your Analogue
cable-TV antenna and press ENTER.
Note:
If you do not wish to carry out the autotuning for
Analogue TV-channels, press MENU to exit the
menu.
•
Auto Installation
- Setup 6 -
Start Auto Tune (Analogue)
7
When the display reads 100%, normal TV-
screen will appear.
Note:
To cancel the auto tuning, press RETURN during the
process.
THE AUTOMATIC TUNING PROCESS WILL
ONLY START BY ITSELF THE FIRST TIME YOU
SWITCH THE SET ON. HOWEVER YOU CAN
RESTART THIS PROCESS VIA THE MENU
SYSTEM (see page 12).
If you could not set up a correct pair of language and
country in this auto setup process, you will be able to
make your preferred language selection as illustrated in
page 12 (On-screen Language Selection).
Quick guide for Menu operation
Make sure the antenna connection and power
supply are connected as per the description on
previous page.
Call Menu and for example: Select Auto Search.
1
Press INPUT SELECT. Select TV or DTV, then
press ENTER. Press MENU.
2
Press or to select Channel then press .
Channel Management
Auto Search
Digital Manual Search
Analogue Manual Search
Picture
Sound
Channel
Feature
Channel
3
Press or to select Auto Search, then press
.
Channel Management
Auto Search
Digital Manual Search
Analogue Manual Search
Picture
Sound
Channel
Feature
Channel
... on the following pages the MENU can be called in
the same way as here.
4
Press MENU to exit the menu.
Note:
The Menu screen disappears automatically after a
defined period of time with OSD Timer. (see page 21)
•
•
•
55L0501A_ENG.indd 1155L0501A_ENG.indd 11 11/25/10 11:32:13 AM11/25/10 11:32:13 AM
To Next Page
Loading...
Need help?
General
