7
Location of controls
Description of Indicators and Controls
1. Remote sensor
2.
(Standby/On) indicator: The LED indicator lights up red in standby mode, and blue in the power
ON mode.
3. Loudspeakers
4. EJECT: Eject a disc.
5. PLAY (▶) button: Playback.
6. STOP (
■) button: Stop.
7.
(Power)-button: Preparation: Connect power-cable to AC220~240V/50Hz.
a) If standby-LED is red, you may power-off. To power-off, press power-button 1x and release.
For confirmation, standby-LED will change to dark. Power-on by remote control is not available.
b) If standby-LED is off, you may power-on. To power-on, press power-button 1x and release.
For confirmation, standby-LED will change to blue.
8. TV/AV/PC/ENTER button: Select input mode. Press TV/AV/PC/ENTER. Then press ▲/▼ to select
input source. Then press ▶. In Menu : Using as ENTER button.
9. MENU button: To display the menu screen.
10.
/ /▲/▼ buttons: Press to change to a higher numbered channel set into memory. Press to
change to a lower numbered channel set into memory. In Menu: Setting.
11.
+/–/◀/▶ buttons / In Menu: Setting.
For complete disconnection from the network, remove the supplied power cable from the socket.
8
3
91011
1
7
2
4
5
6
DVD-Player
55L0501A_ENG.indd 755L0501A_ENG.indd 7 11/25/10 11:32:09 AM11/25/10 11:32:09 AM
To Next Page
Loading...
Need help?
General
