EN
4
LAN VGA
HDMI 2HDMI 3 (ARC)
Ma
nufactured
under
licens
e
from
Do
lb
y L
a
b
orat
ori
e
s.
Dolb
y a
n
d t
he
doubl
e-D
s
ymbol are trademarks
of
Dolby L
a
b
orato
r
ies.
Connections
Chapter 1
Connect the power and antenna
To switch on TV after connecting power cord, press
O
.
Note: Position of power socket varies according to TV model. On certain models, you have to turn on the power
switch rst.
Notes:
-
Disconnect the power cord before connecting devices.
DVD player, home theatre system, PC
Notes:
-
Before connecting a PC, set the PC monitor refresh rate to 60Hz.
-
It is recommended to use as short as possible high quality HDMI cables to avoid possible interferences.
-
It is recommended to use 1m long or shorter VGA cable with ferrite beads in case VGA input is available
in TV and TV is connected using VGA cable. Maximum supported VGA resolution is 1920x1080/60Hz.
Network
connection
Or use an HDMI
connection.
DVD player/
Home theater system
Cable
-PR+
-VOL+
OK
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
