27
Set Lock Code
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes
preset with a lock code of “0000”. You may change the code to any four-digit number you wish.
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
• If you forget the lock code, a new code may be set using the steps listed above.
Customizing your TV
Initial setup (Continued)
Interactive Plug-In Menu
If you skipped this step in the initial setup or your setup has changed, you can redo your setup
in this menu. The Interactive Plug-in Menu is described on page 18.
Software Version
You can confirm the TV’s software version.
Auto Demo
Auto Demo explains this TV’s features to you.
Notes:
• Please complete the Initial Setup menu first. The Auto Demo mode will start
automatically when the Interactive Plug-In Menu is completed.
• If you press any button on the television or remote, with the exception of
POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds
have passed with no operation, the Auto Demo mode will start again.
• If you want to turn off the Auto Demo, press the MENU button.
LCT2403-001A-A English.indd 27LCT2403-001A-A English.indd 27 5/2/08 9:59:56 AM5/2/08 9:59:56 AM
To Next Page
Loading...
Need help?
General
