38
Customizing your TV
Sound Adjust (continued)
Optical Out
You can select the optical digital sound output as PCM or DOLBY DIGITAL when your TV is
connected to an amplifier that has a DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening to 5.1ch sound when watching digital broadcasts. This only applies to
digital channels.
Notes:
• Optical Out can be used for both digital and analog channels.
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don’t
select PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 50.
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
Reset
Resets all sound adjustments at once to the default settings, except for MaxxAudio.
LCT2403-001A-A English.indd 38LCT2403-001A-A English.indd 38 5/2/08 10:00:03 AM5/2/08 10:00:03 AM
To Next Page
Loading...
Need help?
General
