JVC LT-43FV130 - Specifications

EN-27
When the picture is not displayed properly, please follow below steps which may help resolve the
problem.
 Check that the Black Level is set to Auto.
(Go to Picture > Picture Mode Setting > Expert Settings)
When connecting your TV to a computer using an HDMI-to-DVI cable, please ensure that the
Black Level is set to Boost.
 Check that the Contrast Level and/or Colour Saturation are set to 50 or higher.
SPECIFICATIONS
TV Broadcasting
PAL, B/G, D/K, I, SECAM
Receiving Channels
ATV (48.25MHz ~ 863.25MHz)
Number of Preset Channels
100 (ATV)
Channel Indicator
On Screen Display
RF Aerial Input
75 Ohm (unbalanced)
Operating Voltage
AC 100-240V~50/60Hz
( ~ means alternating current)
USB Output
5V 500mA
( means direct current)
Audio Output Power (WRMS.) (10% THD)
8 W
Dimensions DxLxH (with foot)
215 x 957 x 611 mm
Weight (with foot)
6.9 kg
Dimensions DxLxH (without foot)
97 x 957 x 557 mm
Weight (without foot)
6.725 kg
Surrounding temperature
Operation: 0°C ~ 35°C
Storage: 5°C ~ 30°C
Operating Humidity
Less than 80 % RH
Standby Mode
After 3\4\5 hours
Technical Specifications of 2.4G Wi-Fi
Operating frequency
2412 – 2472 MHz (802.11b/g,
802.11n-HT20)
2422-2462MHz (802.11n-HT40)
Maximum output power
16.507 dBm (EIRP)
Digital reception
Reception range
474MHz – 858MHz
Input impedance
75 Ω