JVC LT-43HW95U - Basic Operation; Programme Selection and Source Switching

Basic Operation
Programme Selection
■ Using the on the panel of TV or on the remote control.
■ Using 0- 9 Digital Buttons.
You can select the channel number by pressing 0 to 9. Example:
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume Adjustment
■ Press the +/- on the panel of TV or + - on the remote control to adjust the volume.
■ If you want to switch the sound OFF, press the
.
■ You can release mute by pressing the or increase the volume.
Changing the Input Source
1. You can select the input source by pressing the SOURCE ( ) button on the remote
control.
2. Press the arrow button to cycle through the input source, and press the OK button to
confirm your choice.
Press P∧ to increase channel number.
Press P∨ to decrease channel number.
18
Downloaded from www.vandenborre.be