The TV is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please
carry out the
installation according to the instructions below.
The panel can be scratched easily, so please:
1. Choose an absolutely flat surface to place the TV on.
2. Use soft cloth to face the TV panel,
Do not put TV on the table directly.
Always unplug the AC cord first when installing/removing
the stand.
Step One
Please take note of the base direction:
Step Two
The bottom view of the TV (Front cabinet faces down)
Take the base. Please align the screw holes of the base and
the TV, and then insert the 4 screws into the 4 holes on the
base and tighten them.
M4 x 20mm
Pedestal Screws
Quantity
4pcs
Preparation for Your New TV
5
IMPORTANT: Place a soft cloth on a table and place the TV face
down on the cloth. This is to prevent the panel from being
cracked or damaged.
To Next Page
Loading...
