JVC MC-8200LU - 11 Access Counts

E33
ENGLISH
()
11. ACCESS COUNTS
1 .NORMAL DISPLAY
2.ERROR D I SP L AY
7
. COUNT D I SP L AY
8. IMPORT/EXPORT
1
.TOTAL:000237
2. CR :0 00179
2
.CR
3. MS
: 000179
: 000020
9
.DR6:000004
1.TOTAL:000237
1
.TOTAL:000237
2. CR :000179
SELECT
SELECT
SELECT
Access counts of the main unit (changer) and each unit (carrier, drives 1 - 6 and color disc printer) can be checked using this
function.
1. In the normal display mode, press the MODE switch.
(The menu display appears.)
2. Press the SELECT key 6 times.
("7. COUNT DISPLAY" appears.)
3. Press the ENTER key.
(Select "7. COUNT DISPLAY".)
4. Pressing the SELECT key changes the display.
1. TOTA L: The total access count for the Library.
2. CR : Carrier
3. MS : Mail slot
4. DR1 : Drive 1
5. DR2 : Drive 2
6. DR3 : Drive 3
7. DR4 : Drive 4
8. DR5 : Drive 5
9. DR6 : Drive 6
10. FL : Flip
Only when the MC-CF10U Optional Carrier is installed
s Access counts of unconnected drive units will appear as[------].
s The initial "TOTAL" access count from the factory may be "999880-999999".
s This data may be lost if the equipment is disconnected from the power source for more than six months.