To Next PageTo Next Page
Need help?Do you have a question about the JVC MX-D302T and is the answer not in the manual?
Amplifier Section| output power | 55 watts per channel |
|---|---|
| input sensitivity | 300 mV |
| input impedance | 50 kohms |
Cassette Deck Section| frequency response Type II | 50 - 14, 000 Hz |
|---|---|
| frequency response Type I | 50 - 14, 000 Hz |
| wow and flutter | 0.15% (WRMS) |
CD Automatic Changer Section| cd capacity | 3 discs |
|---|---|
| dynamic range | 85 dB |
| signal-to-noise ratio | 90 dB |
Tuner Section| fm tuning range | 87.5 - 108.0 MHz |
|---|---|
| am tuning range | 530 - 1, 710 kHz |
| dimensions | 265 × 315 × 340 mm |
Speaker Specifications| tweeter size | 5 cm |
|---|---|
| woofer size | 12 cm |
| power handling capacity | 60 W |
Power Specifications| power requirements | AC 120 V, 60 Hz |
|---|---|
| power consumption | 95 watts |
| standby power consumption | 9 watts |
Weight and Dimensions| dimensions | 265 × 315 × 340 mm |
|---|---|
| mass | 7.2 kg |
| speaker dimensions | 215 × 315 × 230 mm |
Details safety information for laser products, including warnings and cautions.
Guidance on proper placement, environment, and ventilation for the system unit.
Instructions for safe handling and unplugging of the power cord.
Advice on what to do in case of malfunction and user-serviceable parts.
List of items supplied with the system, with instructions to check for missing parts.
Step-by-step guide on inserting batteries into the remote control.
Instructions on how to use the remote control and its operating range.
Guide on how to connect and position the supplied FM wire antenna.
Instructions for connecting an optional external FM antenna cable.
Instructions for turning the system on, off, and the standby mode.
How to connect and use headphones for private listening.
Quickly turning on the unit and playing the last tuned radio station.
Basic steps for tuning into AM and FM radio stations.
How to switch between the FM and AM frequency bands.
Steps to start playing a disc and controlling playback.
How to navigate between tracks and specific parts of a track.
Using number keys on the remote to go directly to a specific track.
Procedure for replacing a CD in a tray while another is playing.
Instructions to electronically lock the CD trays for safety.
Steps to unlock the CD trays and re-enable tray operation.
How to start tape playback with a single touch.
Basic procedure for playing a cassette tape.
How to scan to the beginning of the current track on tape.
How to scan to the beginning of the next track on tape.
Important points before starting tape recording, including copyright and tape types.
Step-by-step guide to dubbing tapes between Deck A and Deck B.
Instructions for setting the current time on the system.
Proper methods for handling, cleaning, and storing CDs.
Proper methods for handling, cleaning, and storing cassette tapes.
Advice on what to do if moisture condenses inside the unit.
General notes on system cleanliness and specific cassette deck maintenance, including heads and pinch-rollers.
Details on output power, input sensitivity, and speaker impedance.
Specifications for cassette deck frequency response, wow, and flutter.
Details on CD capacity, dynamic range, and signal-to-noise ratio.
Specifications for FM and AM tuner tuning ranges and dimensions.
Technical details for the SP-D302 speakers, including type and power.
Information on power requirements and consumption.
