9
Listening to Auxiliary Equipment
By playing the sound from auxiliary equipment through the System, you can gain control over how the
music or program sounds. Once the connected equipment is playing through the System, you can apply
the sound effects.
o First make sure that the optional equipment is properly connected to the System. (See page 5).
1. Set the VOLUME control to 0.
2. Press the AUX button.
When System is in Standby mode, the Unit is automatically turned on and “AUX” appears on the
display. The AUX button on the Unit lights up.
3. Start playing the equipment.
4. Adjust the VOLUME control to the desired listening level.
5. Select a Sound Mode, if you wish.
To Cancel the Setting
Change the source by starting any one of the System’s built-in sound sources, such as the Tuner or CD
Player.
AUX
or
EN.MX-D302T[J]/f 98.1.13, 5:05 PM9
To Next Page
Loading...
