JVC MX-D302T User Manual

24
Setting the Timer
o You can set the Timer whether the Unit is on or off.
Procedure For Setting the Timer
1. Press the SHIFT button.
2. Press the 2 TIMER button.
The Timer indicator on the display lights up and the blinking “TIMER ON” changes to the On-Time
setting display.
3. Set the time you want the Unit to
come on.
Press the SELECT 5 + or 4 – button to set
the On-Time.
4. Press the 8 SET button.
“TIMER OFF” blinks on the display, and the display changes to the Off-Time setting display.
5. Set the time you want the Unit to
turn off.
Press the SELECT 5 + or 4 – button to set
the Off-Time.
6. Press the 8 SET button.
The name of the source blinks in the display.
7. Press the SELECT 5 + or 4 – button
to select the source.
Each time you press the button, the source changes
as follows:
Ô TUNER Ô TUNER
REC Ô CD Ô TAPE Ô
TUNER: Selects the last station you were listening to.
TUNER
REC: Records the last station you were listening to.
CD: Plays the last CD you were listening to.
TAPE: Plays the last tape you were listening to.
• In the source “TUNER”, “CD”, or “TAPE”, the timer acts as a Daily timer. Once the Daily timer
has been set, it will be activated at the same time every day until the setting is turned off.
In the source “TUNER
REC”, the timer acts as a Once timer. After the Once timer has been
performed, the details of the setting remain stored but the Timer status is set to off.
\
\
SHIFT
2
TIMER
8
SET
45
– SELECT +
45
– SELECT +
8
SET
45
– SELECT +
EN.MX-D302T[J]/f 98.1.13, 5:06 PM24

JVC MX-D302T Specifications

Amplifier Section

output power	55 watts per channel
input sensitivity	300 mV
input impedance	50 kohms

Cassette Deck Section

frequency response Type II	50 - 14, 000 Hz
frequency response Type I	50 - 14, 000 Hz
wow and flutter	0.15% (WRMS)

CD Automatic Changer Section

cd capacity	3 discs
dynamic range	85 dB
signal-to-noise ratio	90 dB

Tuner Section

fm tuning range	87.5 - 108.0 MHz
am tuning range	530 - 1, 710 kHz
dimensions	265 × 315 × 340 mm

Speaker Specifications

tweeter size	5 cm
woofer size	12 cm
power handling capacity	60 W

Power Specifications

power requirements	AC 120 V, 60 Hz
power consumption	95 watts
standby power consumption	9 watts

Weight and Dimensions

dimensions	265 × 315 × 340 mm
mass	7.2 kg
speaker dimensions	215 × 315 × 230 mm