EasyManuals Logo
Home>JVC>Speaker System>MX-D302T

JVC MX-D302T User Manual

JVC MX-D302T
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
17
Repeating a Selection or the Discs
You can have all the discs, the program or the individual selection currently playing repeat as many times
as you like.
Press the REPEAT button.
Each time you press the button, the Repeat Modes changes as follows.
= = ALL = No indication = (back to the beginning)
: Repeats one track on a CD.
ALL: For Normal Play, repeats all the tracks on the current CD.
For Continuous Play or Random Play, repeats all the tracks on all the CDs in the CD
Player.
For Program Play, repeats all the tracks in the program.
To exit Repeat Mode, press the REPEAT button until the Repeat mode indicator on the display goes
off.
Tray Lock Function
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a single
operation.
When the electronic lock is on, the trays cannot be opened even if the 0 button is pressed.
This function can only be accessed by using the buttons on the Unit itself.
Locking the Trays —————————————————————
1. Put the System’s power into STANDBY mode.
2. While pressing the 7 STOP button, press the 0 button for DISC 1’s
tray on the Unit.
“LOCK ON” appears on the display to let you know that the trays have been locked.
When the CD Player trays are locked, pressing the 0 buttons displays the message “LOCK ON” on
the display and the trays do not open. Also, the 0 button cannot be used to automatically turn on the
power.
Unlocking the Trays ————————————————————
1. Put the System’s power into STANDBY mode.
2. While pressing the 7 STOP button, press the 0 button for DISC 1’s
tray on the Unit.
When the unlock operation is done, “LOCK OFF” appears on the display to show that the lock has
been taken off.
The trays can now be opened by pressing the 0 buttons.
The 0 button can also be used to automatically turn on the power.
REPEAT
EN.MX-D302T[J]/f 98.1.13, 5:06 PM17

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC MX-D302T and is the answer not in the manual?

JVC MX-D302T Specifications

Amplifier Section IconAmplifier Section
output power55 watts per channel
input sensitivity300 mV
input impedance50 kohms
Cassette Deck Section IconCassette Deck Section
frequency response Type II50 - 14, 000 Hz
frequency response Type I50 - 14, 000 Hz
wow and flutter0.15% (WRMS)
CD Automatic Changer Section IconCD Automatic Changer Section
cd capacity3 discs
dynamic range85 dB
signal-to-noise ratio90 dB
Tuner Section IconTuner Section
fm tuning range87.5 - 108.0 MHz
am tuning range530 - 1, 710 kHz
dimensions265 × 315 × 340 mm
Speaker Specifications IconSpeaker Specifications
tweeter size5 cm
woofer size12 cm
power handling capacity60 W
Power Specifications IconPower Specifications
power requirementsAC 120 V, 60 Hz
power consumption95 watts
standby power consumption9 watts
Weight and Dimensions IconWeight and Dimensions
dimensions265 × 315 × 340 mm
mass7.2 kg
speaker dimensions215 × 315 × 230 mm

Related product manuals