JVC MX-D402T

35
Specifications
Amplifier Section
Output Power 80 watts per channel, min. RMS at 6 ohms at 1 kHz,
with no more than 3% total harmonic distortion.
Input Sensitivity/Impedance (1 kHz)
AUX 300 mV/50 kohms
Speaker terminals 6 - 16 ohms
Cassette Deck Section
Frequency Response
Type II (CrO
2
) : 50 - 14,000 Hz
Type I (NORMAL) : 50 - 14,000 Hz
Wow And Flutter 0.15% (WRMS)
CD Automatic Changer Section
CD Capacity 3 discs
Dynamic Range 85 dB
Signal-To-Noise Ratio 90 dB
Wow And Flutter Unmeasurable
Tuner Section
FM Tuner
Tuning Range 87.5 - 108.0 MHz
AM Tuner
Tuning Range 530 - 1,710 kHz
Dimensions 265 × 315 × 340 mm (W/H/D)
(10-7/16 × 12-7/16 × 13-7/16 inches)
Mass 7.8 kg (17.2 lbs)
Speaker Specifications
SP-D402
Type 3-way, 3-speaker bass-reflex type
Speaker
Tweeter 2 cm (13/16 inches) dome × 1
Midrange 5 cm (2 inches) cone × 1
Woofer 16 cm (6-5/16 inches) cone × 1
Power Handling Capacity 80 W
Impedance 6 ohms
Frequency Range 46 - 20,000 Hz
Sound Pressure Level 87 dB/w • m
Dimensions 215 × 315 × 271 mm (W/H/D)
(8-1/2 × 12-7/16 × 10-11/16 inches)
Mass 3.3 kg (7.3 lbs)
Accessories
AM Loop Antenna (1)
Remote Control (1)
Batteries R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
Power Specifications
Power Requirements AC 120 V , 60 Hz
Power Consumption 115 watts
12 watts (in standby mode)
Design and specifications are subject to change without notice.
EN.MX-D402T[J]/1 98.2.26, 1:33 PM35