JVC NX-F40 User Manual

36
Convenient functions of disc/file playback
■ When a disc/file is played back or paused
■ IMPORTANT
• Slide the remote control mode
selector to [SHIFT].
1 Press [VFP].
• The current settings are displayed.
Example: TV screen for the VFP mode
2 Press 2 or 3 (cursor) to select the
video fine processor (VFP) mode.
• Each time you press 2 or 3 (cursor), VFP
mode changes on the TV screen as follows.
- “NORMAL”
For normal playback. (You cannot adjust
the image quality.) Go to step 7.
- “CINEMA”
Suitable for viewing a movie in a dim room.
(You cannot adjust the image quality.)
Go to step 7.
- “USER1/USER2”
You can adjust the image quality.
Go to step 3.
3 Press 5 or K (cursor) to select the
item you want to adjust.
• Each time you press 5 or K (cursor), the
item changes on the TV screen as follows.
- “GAMMA”
Controls the brightness of neutral tints
while maintaining the brightness of dark
and light portions.
(Setting range: –3 to +3)
- “BRIGHTNESS”
Controls the brightness of the display.
(Setting range: –8 to +8)
- “CONTRAST”
Controls the contrast of the display.
(Setting range: –7 to +7)
-“SATURATION”
Controls the saturation of the display.
(Setting range: –7 to +7)
-“TINT”
Controls the tint of the display.
(Setting range: –7 to +7)
- “SHARPNESS”
Controls the sharpness of the display.
(Setting range: –8 to +8)
4 Press [ENTER].
Example: TV screen for “GAMMA”
5 Press 5 or K (cursor) to change
the value.
6 Press [ENTER].
• To adjust other items, go back to step 3.
7 Press [VFP].
NOTE
• It is recommended that you slide the remote
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
• If no operation is made for several seconds
during the procedure, the settings made so far
are automatically stored.
• When the [HDMI MONITOR OUT] terminal is
connected, this function does not affect the
picture quality.
Adjusting the picture quality
(VFP)
Selected VFP mode
For the locations of the remote
control buttons, refer to page 32.
NX-F40_NX-F30[B].book Page 36 Wednesday, December 24, 2008 10:04 AM

JVC NX-F40 Specifications

General

Brand	JVC
Model	NX-F40
Category	Stereo System
Language	English