10
To dim the display and illumination panel—DIMMER
You can change the brightness of the display and illumination panel.
• Dimmer is canceled when you turn off the unit.
To activate ECO mode
Activating ECO mode allows you to reduce power consumption by turning off the display while on
standby.
• To cancel the mode, press ECO/DIMMER again. “ECO OFF” appears for a while then the clock
is shown on the display.
• The battery of iPod is not charged in ECO mode.
Changes the display information.
• For iPod A/iPod B/AUDIO IN:
• For FM:
• When the unit is turned off:
Changes the source to FM (P.17) or AUDIO IN (P.19).
• Changes the source to iPod /iPod (P.14).
• Starts playback and pauses for iPod (P.14).
Adjusts the volume level (VOL MIN/VOL 0 to VOL MAX/VOL 30).
Drops the volume in a moment.
• To restore the volume, press again or adjust the volume level.
Press repeatedly.
DIM 1: Dims the display and illumination panel.
DIM 2: Dims the display much more than “DIM 1” and turns off the illumination panel.
Press while the unit is on standby. “ECO ON” appears on the display for a while.
• The clock is not shown on the display when the unit is on standby.
Buttons Main operations
Source name
Clock
Day of the week
Frequency
Day of the week
Clock
Clock
Day of the week
DIM 1
DIM OFF
(Canceled)
DIM 2
NX-PN10[J].BOOK Page 10 Thursday, April 9, 2009 8:55 AM
To Next Page
Loading...
Need help?
General
