13
Connecting iPod
Connect iPod to dock A or B on the unit.
You can have 2 iPod devices connected at the same time.
• Make sure the unit is on standby when you connect iPod.
NOTES:
• Be careful not to damage the terminal on the dock when connecting/disconnecting iPod.
• Close the cover of the dock when you do not connect iPod to the unit.
About the battery charge of iPod
The battery of iPod is always charged through the unit except when the unit is in ECO mode (see
page 10).
• When 2 iPod devices are connected, both batteries are charged at the same time.
• For details of the battery charging, see the instruction manual for iPod.
Dock A
Dock B
Dock adapter (supplied with iPod
or sold separately)
To detach the dock adapter from the dock:
Pull up the dock adapter with your fingernail or a sharp-pointed tool using the slot.
• Be careful not to injure your fingertips or damage the terminal of the dock.
slot
NX-PN10[J].BOOK Page 13 Thursday, April 9, 2009 8:55 AM
To Next Page
Loading...
Need help?
General
