4
Connections
Connecting the Antenna
NOTES:
• Make sure the FM antenna does not touch any other terminals, connecting cords or the AC power
cord. Also, keep the antenna away from metallic parts of the unit, connecting cords and the AC
power cord. This could cause poor reception.
Do not connect the AC power cord until all other connections have been made.
For better FM reception
Disconnect the supplied FM antenna and
connect to an outdoor FM antenna using a 75
Ω
wire with coaxial type connector.
AM band is not received with this unit.
Rear side
FM antenna (supplied):
Extend it so that you can
obtain the best reception.
Outdoor FM antenna
(not supplied)
FM 75Ω COAXIAL
terminal
(on the rear panel)
NX-PN10[J].BOOK Page 4 Thursday, April 9, 2009 8:55 AM
To Next Page
Loading...
