JVC PC-X110 - Speaker Detachment and Connections; Speaker Detachment Procedure; Audio and Power Cord Connections

PC-X110 B/E/G/GV/EN
When using the speakers detached from the main unit
Lift the speaker up to detach from the main unit by pressing
the lock lever at the rear bottom of speaker in the direction
of the arrow.
Note:
Since the speakers sound differently according to where
they are placed, carefully place them for optimal effect
within the length of the provided speaker cords. It is
recommended that the left and right speakers be placed
symmetrically in relation to the main unit.
(CONNECTIONS
® Do not switch the power on until all the connections are
completed.
* After connecting the speaker cords, When connecting the speaker cords,
bundle
any
slack
into
the
space
for
connect
the
one
marked
with
a
line
to
the
“—"
the speaker cords in the rear panel. terminal first.
uit | $72
* Space for speaker cords
‘+ Marked with line
10 (No. 1904)