JVC PC-X110 User Manual

Programmed play (using the remote control)
© Up to 20 tunes can be programmed to be played in any
required order.
The total playing time of programmed tunesiis displayed
(up to 99 minutes, 59 seconds).
(Example: When programming the 2nd tune to be
played first, the 6th tune next, and then the 12th tune,
etc.)
@© wicear ® a6
SHIFT — PROGRAM
+10
To confirm the details of a program...
Press the PROGRAM button while pressing the SHIFT
botton; the tunes making up the program will be displayed
in programmed order.
+10
mR.
>
Tune number
Notes:
1. If the total playing time of the programmed tunes
exceeds 99 minutes 59 seconds, the total playing time
indication will go out.
2. Itis not possible to program more than 20 tunes.
3. When a disc with 16 or more tunes is loaded, the
“OVER" indicator will appear.
4. When a track number that is higher than 21 is pro-
grammed for a disc which contains more than 21 tunes,
the track No. is displayed, however, “--:--” is shown in
the total playback time.
5. When performing timer playback in the order of “Pro-
grammed play”, step @ above is not required.
PC-X110 B/E/G/GI/EN
Press the m/CLEAR button.
Press the PROGRAM button while pressing the SHIFT
button to set to the programming mode.
Press to designate the required track number.
Designate the remaining tunes by pressing the track
number buttons.
> Press the &/§ button when programming is completed.
Programmed playback starts.
YO Qo
To clear the programmed tunes ...
Press the @/CLEAR button before playing a disc. During
programmed playback, press this button twice. When the
Disc holder is opened, programmed tunes are cleared
automatically
Program order number
(No. 1904) 13

JVC PC-X110 Specifications

General

Brand	JVC
Model	PC-X110
Category	CD Player
Language	English