JVC PC-X95B User Manual

| PC-X95pecewe
3. MW RF ALIGNMENT
3-1 Conditions of the receiver
(1)Power
source:
(2) Function switch position:
(3) Band select switch:
(4) Volume control:
(5) BASS/TRE control:
(6) Variable capacitor:
3-2 Connection of SSG
(1) Modulation:
(2) Frequency:
(3) Output level of the atttenuator in SSG:
Same as mentioned in item 1-1
TUNER
| MW
Approx. 50 mW
Center position
Refer to the following list shown in item 3-4.
400 Hz, 30 %
Refer to the following list shown in item 3-4.
The level shall be decided by the load resistance of the receiver
mentioned in the basic conditions.
Speaker terminal
3-3 Output measuring position:
3-4 Alignment:
Band Select
Switch Position
Sort of Antenna to
be attached to SSG
Frequency of SSG Variable Capacitor Position Aligning Position
eas Seas
138
KH
ae
Max.
capacity
L3
290 kHz (B/E/G/EN
293
kHz
aie
NM
Min.
capacity
|
Tc9
Adjust the above aligning position (L3 & TC3) repeatedly so that the tuner
can receive above frequency range (bandwidth).
145 kHz (B/E/G/EN) k
199 ke Toreceive 145 Kt
290 kHz (B/E/G/EN) 290 kHz
293
kHz
(Gl)
To
receive
993
kHz
Tc10,
Adjust the above aligning position (L4 & TC10) repeatedly so that the
tuner can obtain the best sensitivity.
Band
Select
Sort
of
Ant
t
: .
a
sae
ae
Penns
aa
a
be
Sener
tN
Frequency
of
SSG
Variable
Capacitor
Position.
|
Aligning
Position
520
kHz
(B/E/G/EN)
.
516
kHz
(Gl)
Mex
Gopacly
1,650 kHz (B/E/G/EN)
1.632 kHz (Gl)
Adjust the above aligning position (L5 & TC3) repeatedly so that the tuner
can receive above frequency range (bandwidth).
600 kHz
Loop Antenna
Min. capacity
Loop Antenna
To receive 600 kHz L6
1,500 kHz.(B/E/G/EN) T _ _ 1,500 kHz
1,400
kHz
(Gl)
0
receive
+
499
kHz
TC4
Adjust
the
above
aligning
position
(L6
&
TC4)
repeatedly
so
that
the
tuner
can
obtain
the
best
sensitivity.
:
Band Select
Switch Position
Sort of Antenna to
be attached to SSG
Frequency
of
SSG
Variable
Capacitor
Position
|
Aligning
Position
L7
Max. capacity
18.6 MHz Min. capacity
Adjust the above aligning position (L7 & TC13) repeatedly so that thetune
can receive above frequency range (bandwidth).
To receive 6 MHz
To receive 18 MHz i TC12
Adjust
the
above
aligning
position
(L8
&
TC12)
repeatedly
so
that
the
tuner
can
obtain
the
best
sensitivity.
Loop Antenna .
4. FM IF ALIGNMENT
4-1 Conditions of the receiver
(1) Power source:
(2) Function switch position:
(3) Volume control:
(4) BASS/TRE control:
(5) Variable capacitor:
Same as mentioned in item 1-1 |
TUNER
Approx. 50 mW
Center position
Refer to the following list shown in item 4-4.
(No. 1859) 23

JVC PC-X95B Specifications

General

Brand	JVC
Model	PC-X95B
Category	CD Player
Language	English