To Next Page

To Previous Page

• The operational range between the unit and the device is approximately 8 metres.

• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.

• Compatibility with all Bluetooth® devices is not guaranteed.

• Any obstacle between the device and the unit can reduce operational range.

• Keep this player away from other electronic devices that may cause interference.

• The player will also be disconnected when your device is moved beyond the operational range.

System Reset

There may be times when you need to reset your unit back to the factory settings,

especially if you have moved house or if you experience reception problems.

If you move to another part of the country and pick up the local and national DAB stations

in that area, your previously tuned channels may no longer be available.

1. Ensure the unit is switched on.

2. Press the MODE button repeatedly and select DAB mode.

3. Press the

button to open the CD tray.

4. With the unit in DAB mode and the CD tray open press and hold the MONO/STEREO

button. The unit will now reset itself. Once it has reset it will automatically start to scan

for DAB radio stations.

Bluetooth® Operation

Pair the unit with a Bluetooth® device to listen to music:

1. Press the MODE button to select the Bluetooth® mode. The words “BT LINK” will ash

on the display.

2. Activate your Bluetooth® device and select search mode. “RD-D90” will appear on your

Bluetooth® device list.

3. Select “RD-D90” and enter the password “0000” if necessary. If the connection is

successful the unit will make a beep sound.

4. To disconnect a Bluetooth® device, either switch to another function or disable

the function from your Bluetooth® device. The unit will make a beep sound when

disconnected and “BT LINK” will ash in the display.

If your Bluetooth

® device supports A2DP, playback and control (Skip/Search, Pause/Play and

volume) music via your device.

If your Bluetooth

® device supports AVRCP, use supplied you can also use the remote control

to control playback.

• To pause/resume playback, press

• To skip to a track, press

/ .

• To increase or decrease the volume, press VOLUME +/– .

RD-D90_IB.indd 26 06/06/2016 09:18

JVC RD-D90 User Manual

Questions and Answers: