20
■■
Listening to an Auxiliary Equipment
AUX
AUX
You can listen to an auxiliary equipment.
■
First make sure that the auxiliary equipment is properly con-
nected to the System.(See page 4).
■
1. Set the volume level to minimum.
■
2. Press the AUX button.
"AUX" appears on the display.
■
To listen to the auxiliary equipment, start playing the auxiliary
equipment.
■
3. Adjust the volume to the desired listening
level.
■
4. Apply sound effects, if you wish.
■
Adjust the super woofer volume to reinforce the bass sound.
■
Press the ACS (ACTIVE CLEAR SOUND) button to activate
the ACS effect. (See "ACS (Active Clear Sound) Effect" on
page 6.)
■
Press the MID/TREBLE button to control the tone. (See "Tone
Control (MID/TREBLE)" on page 5.)
Note: For operation of the auxiliary equipment, refer to its In-
structions.
Listening to External
Equipment
RD-MD5(B)-e.fm Page 20 Wednesday, December 2, 1998 11:40 AM
To Next Page
Loading...
