11
AUX
CD
BAND
TAPE
TUNER
SWITCHING THE POWER ON/OFF
button
AUX button
Switching the power on/off
÷ Switching on:
ON /
STANDBY
STANDBY
÷ Switching off:
The STANDBY indicator goes out.
÷ The display window lights. (only when AC power is used)
The STANDBY indicator lights.
÷ The display window light goes off and only the clock time is displayed.
ON /
STANDBY
STANDBY
One touch operation (COMPU PLAY)
(only when AC power is used)
Even when the power is set to STANDBY, pressing the button shown
below switches on the power and selects the source.
TUNER
Function mode
When this button is pressed with a tape loaded, tape playback begins.
When this button is pressed, the tuner is engaged.
A sound source connected to the AUX IN terminal can be engaged.
Operations
Notes:
÷ COMPU PLAY doesn’t function when the unit is used with batteries or
a car adapter. Press the button to turn on. To avoid battery
exhaustion, the display window doesn’t light either when the power is
switched ON.
÷ When switching off the power, be sure to press the button.
÷ The COMPU PLAY function on the remote control has the same function
as that on the main unit.
AUX
CD
TAPE
When this button is pressed with a CD loaded, CD playback begins.
TUNER/BAND buttonCD 3/8 button
TAPE 23 button
To Next Page
Loading...
Need help?
General
