JVC RV-NB90B - Recording to USB Device; Recording from Discs; Recording Audio CDs

23
Recording on a USB device
You cannot record sound while the sleep timer
(page 25) is activated.
Recording discs
You can record a CD to a USB device in two
ways, digital recording and analog recording.
Generally, you can obtain better sound quality
by using digital recording than by using
analog recording.
However, by using analog recording, you can
record sound from a microphone or guitar
connected to the System at the same time
(mixing recording).
Before recording, connect the USB device to
the System.
NOTE
Discs other than audio CD such as MP3/WMA •
discs cannot be recorded.
The volume setting and sound mode have •
no effect on recording.
You can not activate random playback or •
repeat playback during recording.
The file is stored in MP3 format (bitrate: 192 •
kbps).
Do not shake the System during the •
recording; otherwise the tracks might not be
recorded properly.
To record an audio CD
1. Press CD 6.
2. Press 7 to stop playback.
3. Press REC SPEED to select the recording
speed.
HIGH
HIGH
Each time you press the button, the
speed switches between normal speed
(NORMAL) and double speed (HIGH).
If you want to listen to the music during
recording, select normal speed.
• When you perform analog recording,
this step is not necessary. (The songs are
recorded at normal speed.)
4. Press REC/DELETE.
Digital recording starts from the first track
to the last track.
• When you perform analog recording,
press and hold REC/DELETE. "ANLG REC"
blinks. While blinking, press REC/DELETE
to start recording.
RECSTART
The REC indicator lights during the
recording.
In the “CD” folder in the “MUSIC” folder, a •
folder such as “CD001” is created where the
music files are stored.
Recording stops automatically when •
playback stops.
To stop recording manually, press • 7.
Other recording
To record from the current track to the last •
track, press 4/1 or ¡/¢ while
stopped to select the track and then press
REC/DELETE.
To record only the current track, press REC/•
DELETE (for digital recording) or press and
hold REC/DELETE (for analog recording)
during playback.
To record tracks in the programmed order, •
stop program playback (page 14) and then
press REC/DELETE (for digital recording)
or press and hold REC/DELETE (for analog
recording).
Main unit
Remote control
RV-NB90J.indd23RV-NB90J.indd23 12.4.162:08:18PM12.4.162:08:18PM