To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-6010RBK and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Audio Formats Supported | Dolby Digital, DTS |
| FM Tuner | Yes |
| Weight | 10.3 kg |
| Input sensitivity | 200 mV |
| Video Connections | Composite |
| Total Power Output | 500W |
| Power Output | 100W per channel |
| Tuning range | 87.5 MHz - 108.0 MHz (FM) |
| Output | Headphone Jack, Speaker Terminals |
| Speaker load impedance | 8 ohms |
| Dimensions | 435 x 146 mm |
| Inputs | Analog Audio |
| Outputs | Speaker Terminals |
| Tuner | FM |
Covers electrical hazards, proper use, and precautions to prevent damage or injury.
General rules for safe operation, including advice on handling, ventilation, and placement to avoid damage and shock.
Identifies and explains the function of buttons, knobs, and indicators on the receiver and remote control.
Guides users through unpacking, installation location, accessory check, and antenna setup.
Instructions for connecting front, center, and rear speakers to the receiver for optimal sound.
Details connecting analog audio/video sources, a subwoofer, and video components using various cables.
Guides on connecting digital sources via coaxial/optical and setting up power and remote batteries.
Explains how to turn the receiver on/off and select audio/video sources for playback.
Guides on tuning FM/AM stations manually and storing them using the preset function.
Introduces Digital Signal Processor modes, including Dolby Surround, DTS Digital Surround, and JVC Theater Surround.
Guides on adjusting output levels for Dolby and DTS surround sound modes.
Instructions on how to enable and disable Dolby, DTS, JVC Theater Surround, and other DSP modes.
How to use the receiver's remote control to operate connected JVC audio (CD, cassette) and video (VCR, DVD, TV) components.
