To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-6010VBKC and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Power Output | 100W per channel (6 ohms, 1kHz, 1% THD, 1 channel driven) |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Audio Formats Supported | Dolby Digital, DTS |
| FM Tuner | Yes |
| Bluetooth | Yes |
| Weight | 16.3 lbs (7.4 kg) |
| Frequency response | 10Hz-100kHz |
| Total harmonic distortion | 0.08% |
| Input sensitivity | 200 mV |
| Dimensions | 430 x 151 x 315 mm |
| Type | AV receiver |
| Tuning range | FM: 87.5 - 108.0 MHz |
| Speaker load impedance | 6 ohms |
| Video Connections | Composite |
| Speaker Impedance | 6 ohms |
Warning regarding the function of the POWER switch and mains disconnection.
Details the buttons and functions of the remote control unit.
Details the controls and indicators on the receiver's front panel.
Essential preparation steps before setting up the receiver.
Verifies all included items are present for setup.
Guides antenna connection for radio reception.
Instructions for connecting front, rear, and center speakers.
How to connect a powered subwoofer for enhanced bass.
Connects various audio and video sources like CD players and VCRs.
Details connecting TVs, VCRs, and DVD players.
Connects digital audio sources via coaxial or optical cables.
Instructions for plugging the receiver into a power outlet.
Guide on inserting batteries into the remote control.
How to turn the receiver on, off, and into standby mode.
How to choose an audio or video input source.
Watch video from one source, listen to audio from another.
How to use headphones and disable speakers.
How to control the sound output level.
How to temporarily silence the audio output.
Adjusts the bass output level from the subwoofer.
Controls the bass and treble sound frequencies.
Reduces input signal level to prevent distortion.
Instructions for recording audio to a cassette deck or CD recorder.
Balances sound output between left and right front speakers.
Registers if a subwoofer is connected to the system.
Renames input sources for easier identification.
Configures speaker size and type for optimal DSP performance.
Adjusts center speaker sound delay for better audio sync.
Adjusts rear speaker sound delay for better audio sync.
Sets frequency for small speakers to redirect bass.
Reduces excessive bass for surround sound.
Compresses sound range for night listening.
Saves sound settings for different sources.
Sets the receiver to turn off automatically after a period.
Guides manual tuning of FM/AM radio stations.
How to store and recall favorite radio stations.
Adjusts FM reception for better clarity (AUTO/MONO).
Explains Dolby Surround, Dolby Digital, and DTS Digital Surround.
Explains Digital Acoustic Processor modes for enhanced soundscapes.
Explains how DSP modes create acoustic environments.
Lists DSP modes based on speaker setup.
Fine-tunes surround mode levels and test tones.
Adjusts JVC Theater Surround effect levels and speaker outputs.
Automatically switches source when a component is played.
Receiver controls power state of connected components.
Starts CD playback and cassette recording simultaneously.
Operates JVC audio devices via receiver remote.
Operations for the built-in FM/AM tuner.
Adjustments for subwoofer, levels, tone, and effects.
Remote operations for the CD player.
Operations for a multi-disc CD changer.
Remote operations for the cassette deck.
Remote operations for the CD recorder.
Remote operations for the VCR.
Remote operations for the DVD player.
Remote operations for the TV.
