To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-6012VSL and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| Audio Formats Supported | Dolby Digital, DTS |
| FM Tuner | Yes |
| Weight | 9.5 kg |
| Tuning range | FM: 87.5-108 MHz |
| Input sensitivity | 200 mV |
| Signal to noise ratio | 98dB (line) |
| Speaker load impedance | 6 Ohm |
| Video Connections | composite, HDMI |
General handling instructions and warnings to prevent damage or injury.
Procedure for electrical shock hazard testing after product reassembly.
Procedure for adjusting the idling current in the power amplifier.
Pin layout and function details for the system controller IC.
Procedure to set the correct voltage for the unit based on region.
Connecting digital audio sources using coaxial or optical cables.
Steps for safely connecting the receiver to an AC power outlet.
How to turn the receiver on, off, and into standby mode.
How to choose and switch between different audio/video sources.
How to increase or decrease the audio volume.
How to adjust bass and treble sound levels.
Configuring speaker size (Large/Small/No) for optimal DSP performance.
Registering components connected to the digital input terminals.
Choosing between analog or digital input signals for a source.
Assigning and storing sound settings for different sources.
Descriptions of Dolby Surround, DTS Digital Surround, and JVC Theater Surround.
How available DSP modes vary based on speaker setup.
Adjusting speaker output levels for Surround modes.
Specific instructions for adjusting Dolby and DTS surround settings.
How to select and activate different DSP modes like Pro Logic, Digital, DTS, and Theater Surround.
How to use the remote control to operate Tuner, Amplifier, and CD player functions.
Detailed remote control operations for VCR, DVD player, and TV.
A chart listing common problems, their possible causes, and solutions.
Output power and audio specifications for the amplifier section.
