To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-7010VBK and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 5.1 |
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Component Video Inputs | 2 |
| Component Video Outputs | 1 |
| Digital Audio Inputs | 2 Optical, 1 Coaxial |
| Analog Audio Inputs | 4 |
| Dolby Digital | Yes |
| DTS | Yes |
| Tuner | FM/AM |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 98 dB |
| Speaker Impedance | 6 ohms |
Covers essential safety warnings regarding electrical shock, moisture exposure, and proper handling.
Provides instructions for optimal placement to ensure adequate airflow and prevent overheating.
Guides through initial setup, recommended locations, handling, and verification of supplied accessories.
Details how to connect FM/AM antennas and various speaker configurations for optimal sound.
Explains how to connect external audio and video sources like turntables, CD players, and VCRs.
Instructions for turning the unit on/off, standby mode, and selecting playback sources.
Guides on adjusting volume levels and selecting front speakers for playback.
Setting up which digital input terminals are connected to specific components.
Explains various surround sound modes like Dolby Pro Logic, Dolby Digital, and DTS.
Explains how to use the receiver's remote to control connected JVC audio components.
Lists common operational problems and provides solutions for resolving them.
Detailed technical specifications for the amplifier section and audio performance.
Specifications related to FM/AM tuners, power requirements, dimensions, and mass.
