To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-7020VBK and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Power Output | 100 W per channel (8 ohms) |
| Tuning range | FM: 87.5 - 108 MHz; AM: 530 - 1700 kHz |
| Total Harmonic Distortion | 0.08% |
| Inputs | 1 x Phono |
| Outputs | 1 x Tape, 1 x Video |
| Input sensitivity | 2.5 mV (Phono) |
| Speaker load impedance | 8 ohms |
| Dimensions | 17.1 x 5.4 x 13.4 inches (435 x 138 x 340 mm) |
| Weight | 18.7 lbs (8.5 kg) |
Essential warnings and cautions for safe operation and to prevent damage.
Instructions on maintaining adequate airflow around the unit for heat dissipation.
Identification and numbering of all controls and indicators on the front panel.
Identification of buttons and functions on the remote control unit.
Precautions for installation location, handling the unit, and power cord safety.
List of included accessories and steps for inserting batteries into the remote.
Instructions for connecting FM and AM antennas for optimal reception.
Detailed guide on connecting front, rear, and center speakers, including impedance.
Guide for connecting various audio and video sources like turntables and VCRs.
Information on connecting digital audio sources using coaxial and optical inputs.
Steps for safely connecting the unit to an AC power outlet.
How to turn the unit on/off and select an audio/video source.
Adjusting master volume and selecting front speaker pairs.
Listening with headphones and adjusting the display's brightness.
Using the sleep timer to turn off the unit and temporarily mute sound.
How settings are memorized and understanding display signal indicators.
Registering components connected to digital input terminals (DIGITAL IN 1-4).
Selecting the correct input mode (analog or digital) for audio sources.
Configuring the video input terminal setting for component or S-video/composite.
Setting speaker sizes, distance from listener, and subwoofer presence.
Reducing analog input signal level to prevent distortion.
Adjusting the output balance between the left and right front speakers.
Adjusting the bass and treble frequencies for desired sound quality.
Adjusting subwoofer output level and activating bass boost function.
How to tune stations manually and store them as presets.
Selecting AUTO or MONO for FM reception to improve clarity.
Explanation of Dolby Digital, DTS Digital Surround, and Dolby Pro Logic II modes.
Using Digital Acoustic Processor (DAP) modes and All Channel Stereo.
Reproducing analog discrete 5.1 channel output from DVD players.
How speaker configurations affect available surround modes.
Selecting and adjusting surround modes like Dolby Digital, DTS, and Pro Logic II.
Fine-tuning effect levels for DAP modes and speaker output for All Channel Stereo.
Steps to activate DVD MULTI mode and adjust speaker levels.
How components turn on/off automatically and source selection.
Procedure for synchronized recording between CD player and cassette deck.
Diagrams for connecting JVC video components via AV COMPU LINK.
Guidance on connecting VCR/DVD player to TV using S-video, composite, or component.
One-touch play, auto TV input mode, and auto power on/off functions.
Using the remote to control JVC audio and video equipment.
Setting manufacturer codes to operate TVs, VCRs, and DVD players from other brands.
Information on locating JVC service centers and purchasing accessories.
Details of the product's limited warranty terms and conditions.
