30
Basic operations of disc/file playback
■ When a disc/file is played back
Press the number buttons to select
the chapter number or track number.
You can skip within a file at approximately 5 minute
intervals. This is useful especially when you want
to skip within a long file.
■ When a disc/file is played back
Press 2 or 3.
• Each time you press 2 or 3, the playback posi-
tion skips to the beginning of the previous or
next interval. Each interval is approximately 5
minutes.
NOTE
• Intervals are automatically assigned from the
beginning of a file.
• You can use this function only within the same
file.
■ When a disc is stopped or played back
1 Press [MENU] or [TOP MENU].
• The menu screen is displayed.
2 Press 5, /, 2 , 3 or the number
buttons to select the desired track.
3 Press [ENTER].
NOTE
• You can use this function only when a menu
screen is recorded on the disc.
• For a VCD/SVCD, [MENU] and [TOP MENU]
may be unavailable in step 1. In this case, press
[RETURN] once or more.
• For a VCD/SVCD, you cannot use 5, /, 2 or
3 in step 2.
• For a VCD/SVCD whose menu screen has a
couple of pages, you can change the page by
pressing 4 or ¢ in step 2.
• Playback may start for some discs without
pressing [ENTER] in step 3.
Selecting a chapter/track
using the number buttons
Skipping at approximately 5
minute intervals
(PBC off)
Selecting a track from the
menu screen
For the locations of the remote
control buttons, refer to page 23.
DD-831[UJ].book Page 30 Thursday, March 8, 2007 9:35 AM
To Next Page
Loading...
