JVC SP-PWA9

45
4545
45
English
■■
SYSTEM MENU setting
AUTO STANDBY
When the system is stopped for more than 30 minutes or 60 min-
utes in the source DVD, the system enters standby mode automat-
ically.
1
Open the SYSTEM menu.
See “Using the preference setting menus” on page 42.
2
Move the pointer to AUTO STANDBY using
the 5
55
5/∞
∞∞
∞ cursors.
3
Press the 2
22
2/3
33
3 cursors to select the time.
Pressing the cursor toggles between the following options:
RESUME
You can select the resume function to be on or off. See page 25.
1
Open the SYSTEM menu.
See “Using the preference setting menus” on page 42.
2
Move the pointer to RESUME using the 5
55
5/∞
∞∞
∞
cursors.
3
Press the 2
22
2/3
33
3 cursors to select ON or OFF.
Pressing the cursor toggles between “ON” and “OFF”.
AV COMPULINK MODE
If you use the AV Compulink system, you must set this item cor-
rectly.
1
Open the SYSTEM menu.
See “Using the preference setting menus” on page 42.
2
Move the pointer to AV COMPULINK MODE
using the 5
55
5/∞
∞∞
∞ cursors.
3
Press the 2
22
2/3
33
3 cursors to select DVD1, DVD2
or DVD3.
Select “DVD1,” “DVD2” or “DVD3” according to the equip-
ment to be connected. See page 53.
Note:
• If you do not use the AV Compulink system, this setting is
not necessary.
60:
Time is set to 60 minutes.
30:
Time is set to 30 minutes.
OFF:
The auto standby function is off.
ON:
Pressing PLAY while stopped or on standby starts
playback from the resume point if it is memorized.
OFF:
Pressing PLAY while stopped or on standby starts
playback from the beginning of the disc.
AUTO STANDBY
OFF
OFF
EXIT
RESUME
DVD 1
AV COMPULINK MODE
PRESS KEY
DISPLAY
LANGUAGE
SYSTEM
AUTO STANDBY
OFF
OFF
EXIT
RESUME
DVD 1
AV COMPULINK MODE
PRESS KEY
DISPLAY
LANGUAGE
SYSTEM
AUTO STANDBY
OFF
OFF
EXIT
RESUME
DVD 1
AV COMPULINK MODE
PRESS KEY
DISPLAY
LANGUAGE
SYSTEM
TH-A9(UW).book Page 45 Monday, March 12, 2001 9:17 AM