JVC SP-PWM45

Advanced operations
40
4
Press Cursor
/
/
5
to select the desired
audio language.
Each time you press the button, the audio language changes.
5
Press ENTER.
The pop-up window disappears.
To turn off the on-screen bar
Press
ON SCREEN
.
NOTE
• Some audio languages are abbreviated in the pop-up window. See
“The language codes list” (
A
pg. 48).
Selecting the audio channel
When you play certain karaoke (Video CD/SVCD),
you can enjoy karaoke by selecting the audio
channel to play.
• The sound of each audio channel depends on the contents of the
disc.
7
During playback
When using the AUDIO button:
1
Press AUDIO.
The following pop-up window appears on the TV screen.
Example: “ST” (stereo) is selected out of 3 audio channels
recorded.
2
Press AUDIO repeatedly to select the
desired audio channel.
Each time you press the button, the audio channel changes.
Example for Video CD:
]
ST
]
L
]
R
]
(back to the beginning)
• ST: To listen to normal stereo playback.
• L: To listen to L (left) audio channel only.
• R: To listen to R (right) audio channel only.
Example for SVCD:
]
ST 1
]
ST 2
]
L 1
]
R 1
]
L 2
]
R 2
]
(back to
the beginning)
•ST 1/ST 2:
To listen to normal stereo playback of ST 1 or 2 channel.
•L 1/L 2:
To listen to L (left) 1 or 2 audio channel.
• R 1/R 2:
To listen to R (right) 1 or 2 audio channel.
The pop-up window disappears if no operation is done for
about 5 seconds.
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor
3
/
2
to move
H
to .
3
Press ENTER.
The following pop-up window appears under the selected item.
Example: “ST” (stereo) is selected out of 3 audio channels
recorded.
4
Press Cursor
/
/
5
to select the desired
audio channel(s).
Each time you press the button, the audio channel changes.
5
Press ENTER.
The pop-up window disappears.
To turn off the on-screen bar
Press
ON SCREEN
.
TH-M65-55-45[J].book Page 40 Friday, March 14, 2003 6:52 PM