JVC SP-XT9

1-60 (No.MB368)
Press the [ 0 ] key on
the remote controller
.
"MONITOR"
FL indication FL indication
(After 2 seconds)
"xxxxyyyy"
Perform monitor output.
A
Press the [ +10 ] key on
the remote controller
.
"INIT"
FL indication
Initialize EEPROM (MECHA)
Press the [ PLAY ] key
on the remote controller
.
"LSR JIT"
FL indication FL indication
(After 2 seconds)
"xxxxyyyy"
Start PLAYING and obtain
LASER CURRENT and
JITTER value.
"XXXXXXX"
FL indication
Stop JITTER measurement.
Press the [ STOP ] key
on the remote controller
.
Press the [ MENU ] key
on the remote controller
.
Return to starting screen
of DVD test mode.
Press the [ STANDBY ]
button on the main unit
.
"POFF OK"
FL indication
DVD check mode is completed.