JVC TH-C3 User Manual

Tuneroperations
IMPORTANT
Be_re using the remote control R_rthe
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM
AUDIO FM/AM
NOTE
• When FM or AM is selected as the source, you can select All Channel
Stere() (ALL ST) and SURR OFF mode.
The buttons described below are used on pages 39 to 40. ]
FM/AM
MEMORY
Remote control
mode selector
= TUNING @/@
FM MODE
Number buttons
Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
'_ 810,_
2 Press TUNING @/@ repeatedly until
you find the frequency you want.
When you hold down the button until the system stm'ts
searching f'or stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
NOTE
• When an FMstereo program isreceived,/he ST indicator lights on/he
display window.
39

JVC TH-C3 Specifications

General

Brand	JVC
Model	TH-C3
Category	Home Theater System
Language	English