JVC TH-D337H User Manual

14
GB
Method 2: HDMI Hub Connection
t Ensure HDMI cables that can support the ARC function are used.
t HDMI-CEC will be called dierent names by dierent manufacturers – please refer to your owner’s
manual for details on setting up HDMI-CEC and ARC.
t While using a HDMI cable for ARC function, CEC (Consumer Electronics Control) provides
interoperability between the unit and various devices (e.g. TV). However, this unit is not guaranteed to
fully operate with all HDMI-CEC enabled devices. This is NOT a defect.
Using Your TV as a Hub
The ARC (Audio Return Channel) function allows sound to travel to and from your ARC-
compliant TV to your soundbar through a single HDMI connection. To enjoy the ARC
function, please ensure that your TV is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, the CEC feature allows you to adjust the volume output
(VOL +/– and MUTE) of the soundbar with the TV remote control. When you switch your TV
on/o with your remote control, your soundbar will also be switched on/o. Be patient that
it might take a few seconds for your TV to tell your soundbar to switch on or o.
Use this method to connect all your devices into your TV.
1. Connect an HDMI cable (not included) from your soundbar’s HDMI ARC (TV) socket to
the HDMI (ARC) socket on your ARC-compliant TV.
2. After connection, press
button on the unit or remote control to switch the unit on.
3. Press SOURCE on the unit or HDMI ARC on the remote control to select HDMI ARC
mode to play audio from your input device.
Rear View of the Soundbar
TV
Blu-ray Player / DVD
Player / Recorder
Set-top Box Satellite
Receiver
Game
Console
Video
Camera
HDMI Cable (not included)
The unit may not be able to decode all digital audio formats from the input source. In this case, the unit
will mute. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game console,
DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting
details) with
HDMI input.
TH-D337H_IB_170505_will.indd 14 5/5/2017 4:19 PM

JVC TH-D337H Specifications

Power

power supply	AC120V~ 60Hz
power consumption	30 W
output power	30 W x 2

Connectivity

bluetooth version	V 4.2
maximum power transmitted	<20 dbm
frequency bands	2402 MHz ~ 2480 MHz

Audio Input

usb socket	5V == 0.5A
audio input sensitivity	700mV
frequency response	120Hz - 20KHz

Remote Control

distance	6m
angle	30°
battery type	CR2025

Weight and Dimensions

unit dimension	952 x 63 x 65.7 mm