JVC TH-D337H - General Operation; Powering On;Off and Standby; Selecting Input Modes

17
GB
General Operation
Standby / ON
When you rst connect the unit to the mains socket, the unit will be in Standby mode.
t Press
on the unit or on the remote control to switch the unit on.
t Press
on the unit or on the remote control again to switch the unit back to Standby
mode. The Power Indicator will light up red.
Automatic Power O Function
The unit automatically turns to Standby mode after about 15 minutes if the TV or the
external unit is disconnected, switched o or the volume is too close to mute.
t To switch the unit o completely, remove the mains plug from the mains socket.
t Please turn the unit o completely to save energy when not in use.
Adjusting the Speaker Level Settings and Eects
Adjusting the Volume
t Press VOL + / – to adjust the volume.
t If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again,
or press VOL + / – on the unit or on the remote control to resume normal listening.
Adjusting the Bass Volume Level
Press BASS + / – repeatedly to adjust the bass volume level.
Adjusting the Treble Volume Level
Press TREBLE + / – repeatedly to adjust the treble volume level.
Selecting Modes
Press SOURCE on the unit repeatedly to select between AUX 1, AUX 2, OPTICAL, and
HDMI ARC mode.
Alternatively,
t press AUX 1/ AUX 2 on the remote control to select AUX 1 and AUX 2 mode.
t press OPTICAL on the remote control to select OPTICAL mode.
t press HDMI ARC on the remote control to select HDMI ARC mode.
TH-D337H_IB_170505_will.indd 17 5/5/2017 4:19 PM