EasyManuals Logo

JVC TH-WL703B User Manual

JVC TH-WL703B
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26
AUX / MP3 LINK / Optical / HDMI Operation
There are AUX / OPTICAL / HDMI 1 / HDMI 2 sockets located at the rear of the unit and
MP3 LINK socket at the top of the unit. Analogue audio sound signals from other sources
can be connected to the unit through these sockets.
1. Before connecting to the mains socket, ensure all the connections are completed.
2. While in the ON mode, press SOURCE on the unit repeatedly to select HDMI 1, HDMI 2
/ TV ARC / OPTICAL / AUX / MP3 LINK modes.
Alternatively directly press ARC, OPT, HDMI1, HDMI2, AUX and MP3 on the remote control to select the
desired mode.
• The operational range between the unit and the device is approximately 8 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• If no other Bluetooth® devices pairs with this unit within 2 minutes, the unit will recover to its previous
connection.
• The player will also be disconnected when your device is moved beyond the operational range.
3. Operate your audio device directly for playback features.
Bluetooth® Operation
Pairing the unit with a Bluetooth® device to listen to music:
1. During ON mode, press SOURCE on the unit repeatedly or press BT on the remote
control to select Bluetooth® mode. The display will show BT READY”.
2. The system has entered pairing mode and should be searchable. If you cannot nd the
soundbar, press PAIR on the remote control. The display will show PAIR”.
3. Activate your Bluetooth
® device and select the search mode. TH-WL701B or “TH-
WL703B will appear on your Bluetooth® device list.
4. Select “TH-WL701B or “TH-WL703B and enter 0000 for the password if necessary.
The display will show PAIRED”.
5. To disconnect the Bluetooth® function, switch to another function on the unit or disable
the function from your Bluetooth® device.
If your Bluetooth
® device supports A2DP, play music via your device.
If your Bluetooth
® device supports AVRCP, use supplied remote control to control play.
• To pause / resume playback, press
/OK.
• To skip to a track, press
.
TH-WL701B_703B_IB_140418_Annie.indd 26 18/4/14 7:14 pm

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC TH-WL703B and is the answer not in the manual?

JVC TH-WL703B Specifications

General IconGeneral
BrandJVC
ModelTH-WL703B
CategorySpeaker System
LanguageEnglish

Related product manuals